Product Description
THE RED Korea is a new generation of fat melting and removal essence, which is aimed at the fat type. It is different from the traditionalb fat melting and removal needles. It improves the shortcomings of traditional fat melting and removal needles that are easy to be painful, easy to swell, and slow to take effect! It has high safety, quick effect and low side effects. It has been approved by the Korean KFDA.
After use, there is no adverse reaction, and the effect can be seen as soon as 24 hours! The world's first addition of highly concentrated VB and other effective ingredients that quickly break down fat, promote fat decomposition while quickly excreting from the body, and simultaneously improve the perfect shape after tightening. It can be used for facial obesity, double chin, excessive body fat, etc. shape.
Introduction to the main ingredients of The Red:
Vitamin B12: In the form of coenzyme, it can increase the utilization rate of folic acid and promote the metabolism of carbohydrates, fats and proteins.
Metabolize fatty acids, so that fat, carbohydrates, and protein are properly used by the body
Bromelain: It can catalyze the cleavage of peptide bonds in protein molecules, decompose
proteins, peptides, lipids and amides, and has anti-inflammatory and anti-edema effects.
Lecithin: Decomposes excess fat particles, replenishes physical acetylcholine, and replenishes energy
Principles of weight loss
When the drug passes through the subcutaneous tissue, it stimulates the increase in the amount of liporase in the local fat cells.
Then it stimulates the activation of protein, so that the deoxynucleotide triphosphate in the cell is converted into deoxynucleotide.
Promote the activation of fat and increase the cut-off of fatty acids, so that they are broken down into small states and excreted from the lymphatic system with the body's metabolism.
The first step is to apply anesthetic (if anesthetic is not applied, this step can be omitted)
1. Clean the face and wipe off the moisture
2. Then apply the anesthetic to the application site without seeing the skin. Can be covered with plastic wrap.
3. Wait for 30-40 minutes to wash off with water or wipe clean with wet wipes Step two disinfection
First put on medical gloves, first use a medical cotton swab with alcohol to disinfect the body and mouth of the bottle of fat melting and removal bottle that needs to be beaten (do not use a medical cotton swab to soak alcohol back and forth, throw away one after use and replace with another )
The third step is to draw medicine:
1. Use a 1ml or 2ml needle tube to draw the medicine into the needle tube (Never use a painless needle to draw the medicine, but use the needle that comes with the needle tube to draw the medicine) 1ml needle tube can be drawn to 0.8
Don't pull out the needle afterwards. Separate the needle from the needle. If you put it on the
face, install a 4mm needle. If you put it on the abdomen and legs, install a 13mm needle.
Remember to perform aseptic operation! ! !
Fourth facial disinfection
Dip iodophor with a medical cotton swab (don't use a medical cotton swab to dip iodophor on the back and forth, replace one after using one), and then disinfect the part you need with iodophor, and then suck it out with a 5ml needle with normal saline. Squeeze on a few pieces of medical gauze, wipe the area that has just been disinfected with iodophor, and wipe it again with the gauze of saline, and finally disinfect the glove on the palm of the hand, wipe it thinly, and then the injection.
The fifth step injection operation
The Fat melting and removal parts of the face must be spaced 1cm apart. Find a good spot and inject 0.2ml (full vertical penetration) at each point. If there is no blood, you can let it go) and then push the medicine. Finally, pinhole bleeding is normal.
Draw the medicine again: In order to save a syringe, the needle can be removed after the injection, and then the needle that has not been pulled out of the bottle is refilled to draw the medicine again. After the medicine is drawn, the needle can be removed and the injection needle can be replaced and then injected. A medicine-drawing needle can only draw medicine from one bottle.
After the medicine is drawn out, the needle can no longer be used. The second bottle needs to be replaced with a new needle.
The sixth step is the end Do not drop the gloves, press the medical gauze + massage, gently massage, accelerate the lipolysis (massage for 15-20 minutes)
Massage for 10 minutes after the injection to help the drug to be absorbed and distributed evenly. The next day, apply hot compresses every day + massage for 20 minutes for a week.
The correct technique can achieve the best results.
Face injection volume and injection distance
Only two parts can be hit: the face and double chin. The rest cannot be operated. The
highest measurement for all positions of the face at a time is 1 box/5 pieces
The measurement given below is the amount of fat, which should be appropriately reduced according to your own situation.
20-30ml (2-3 bottles) for cheek, 10-15ml (1-1.5 bottles) on one side of cheek
Double chin 20ml once (2 bottles), 10ml on one side of double chin (1 bottle)
Draw a total of 20 points from time to time, each point is separated by one centimeter. Pinch the shoulder with your hand and insert the needle vertically. The depth is 4mm. It cannot be deep or shallow, otherwise it will affect the effect.
Each point is 0.5ml-1ml. , There is a scale on the needle, and the speed cannot be too fast when pushing the medicine, otherwise it will be dizzy. It is recommended that the customer do not have an empty stomach before melting and removal the fat, and press with a cotton pad
after the needle is removed, so as not to flow out and cause waste.
Body injection volume and injection interval
Part of the body 20 to 40 ml at a time (the injection measurement is shown in the figure) Maximum injection volume: a single injection of the entire body including the face cannot exceed (10 vials/2 boxes)
The body injection is about 1-2cm apart, 1.5-2ml at each point.
If it is fat on the back calf, the depth of the needle tip is 5mm, and the maximum is not more than 6mm. If it's the abdomen, thigh, the needle tip is 6mm. No more than 8mm at most, because the fat in these two places is thick.
The above data is not absolute, you can adjust it according to your own situation
Product Parameters
| Product Name |
The Red LIpolytic Solution |
| Place Of Origin |
Korea |
| Volume |
10*10 ML |
| Use Area |
Face Body |
| Main Ingredien |
Vitamin B12, Bromelain, Lecithin |
| Form |
Liquid |
| Certification |
MSDS, ce |
| Key Words |
Dermal Filler |
| Storage |
Room Temperature |
| Function |
Fat Dissolving |
Face injection volume and injection distance
Only two parts can be hit: the face and double chin. The rest cannot be operated. The
highest measurement for all positions of the face at a time is 1 box/5 pieces
The measurement given below is the amount of fat, which should be appropriately reduced according to your own situation.
20-30ml (2-3 bottles) for cheek, 10-15ml (1-1.5 bottles) on one side of cheek
Double chin 20ml once (2 bottles), 10ml on one side of double chin (1 bottle)
Draw a total of 20 points from time to time, each point is separated by one centimeter. Pinch the shoulder with your hand and insert the needle vertically. The depth is 4mm. It cannot be deep or shallow, otherwise it will affect the effect. Each point is 0.5ml-1ml. , There is a scale on the needle, and the speed cannot be too fast when pushing the medicine, otherwise it will be
dizzy.
It is recommended that the customer do not have an empty stomach before melting and removal the fat. and press with a cotton pad after the needle is removed, so as not to flow out and cause waste.
Body injection volume and injection interval
Part of the body 20 to 40 ml at a time (the injection measurement is shown in the figure) Maximum injection volume: a single injection of the entire body including the face cannot exceed (10 vials/2 boxes)
The body injection is about 1-2cm apart, 1.5-2ml at each point.
If it is fat on the back calf, the depth of the needle tip is 5mm, and the maximum is not more than 6mm. If it's the abdomen, thigh, the needle tip is 6mm. No more than 8mm at most, because the fat in these two places is thick.
The above data is not absolute, you can adjust it according to your own situation
Effection
Notes
1. During the post-use period, smoking, alcohol, pungent, spicy, and irritating foods are contraindicated.
2. After use, there will be slight redness, swelling, bruises and temporary discomfort. Cold compresses can be used.
3. Keep the operated part clean. Do not scratch the needle with your hands. Keep it away from water for 24 hours to prevent infection. If the used part has symptoms of infection, use it temporarily.
4. Effective after the swelling is reduced, the best effect is generally achieved within one to two weeks.
5. It is normal to experience thirst and increased urination after use.
6. After use, you should pay attention to a normal diet, do not overeating, and proper exercise can speed up metabolism and enhance physical fitness.
7. The effect can be permanent if it does not regain weight or increase weight suddenly. If individual users do not pay attention to their diet and have a slight rebound, they can be used repeatedly.
8. People who are allergic to soy products should not use it, and those who are extremely allergic should use it with caution.
Certifications
Packaging & Shipping
Related Products
Company Profile
Skinject is a professional company mainly deal with dermal filler injection and hyaluron pen.
As we age, our skin loses fat, collagen, and other important elements that provide facial volume and support. We also start to see the formation of lines, wrinkles and folds that can contribute to us looking older. Dermal fillers such as Skinject can give instant and natural results to combat these signs of ageing.
Skinject is a range of products for facial aesthetic treatments to efficiently reduce lines, folds and wrinkles, create fuller
lips, enhance contours and facial volume, as well as improve skin quality, structure and elasticity. The Skinject range is
designed to complement the varying stages of facial ageing to provide natural-looking results.
1. who are we?
We are based in Shandong, China, start from 2018,sell to North America(55.00%),Eastern Europe(10.00%),Western Europe(8.00%),Africa(8.00%),Southern Europe(7.00%),Northern Europe(6.00%),Mid East(4.00%),South America(2.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
HA Dermal Filler,Hyaluronic Acid,Dermal Filler Injection,Hayluron Pen,Mask
4. why should you buy from us not from other suppliers?
With rich export experience, the factory has advanced production equipment to ensure the quality of the products.
5. what services can we provide?
Accepted Delivery Terms: FOB,EXW,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,MoneyGram,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,German,French,Russian,Italian
Audited Supplier 
){kind=link}